A generational shift in biogas – from old to new

An older biogas plant has been taken out of service, and a new plant has been built alongside it. Before production could move to the new plant, it had to be documented that everything was installed correctly and worked as intended. From the start of construction until the new plant received final approval, Leap Solutions and the customer worked together to carry out the project.

The project began with a line walk, where Leap Solutions checked the P&ID drawings against the actual installation. This meant discrepancies were found and fixed while they were still easy to handle.
Leap Solutions then carried out cold and hot testing, so the plant’s components and processes were tested step by step before it was put into operation.

The plant was then commissioned one section at a time, and the operating parameters were fine-tuned together with the customer.
Throughout the project, we were the customer’s technical partner and made sure the new plant could take over from the old one and run reliably from day one.